PRODUCTS
Shripal Metal Limited has been providing quality industrial raw material for world class engineering projects, ranging from high-tech nuclear plants to extreme pressure endurable petrochemicals plants, from high speed production food & beverages plants to sterile medical equipment establishments. Over the years, the company has gained vast experience in understanding diversified business needs of the industry and is supplying high-quality products for new projects, expansion, diversification and maintenance of projects. Shripal Metal has played a key role as manufacturer as well as a trader for national and international projects.
-
Pipes
-
Pipe Fittings
-
Flanges
-
Fasteners
-
Plates
-
Rods
-
Structural Steel
-
Hollow Sections
Characteristics
It is the most common type of titanium grade and is considered to have a good balance of corrosion resistance, strength, weldability, and workability, making it a highly versatile material. Strength is higher than grade 1, but lower than grade 5. Tensile strength is equivalent to low carbon steel.
???1000???2000???3000???3500???4000???2500??3990?
Stock Form and Sizes
Corrosion Resistance
Chemical Composition
Limits | C | Mn | Si | Mo | W | Co | V | P | S |
|---|---|---|---|---|---|---|---|---|---|
min | 15 | 3 | |||||||
max | 0.01 | 1 | 0.08 | 17 | 4.5 | 2.5 | 0.35 | 0.025 | 0.01 |
?Above is standard values of JIS H4650. For further information, please contact us.
?The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.
Mechanical Properties (Round Bar)
?Above is standard values of JIS H4650. For further information, please contact us.
Value | Condition | Yield Strength(Mpa) | Tensile Strength(Mpa) | Elongation(%) | Hardness(HB) |
|---|---|---|---|---|---|
ASTM Min Value | Solution Annealed | 283 | 690 | 40 | |
Typical Values at RT | Solution Annealed | 402 | 794 | 60 | 195 |
International Standard Comparison Chart
Standards | Material | Round Bars | Plates/Sheets | Seamless Pipe/Tube | Welded Pipe/Tube |
|---|---|---|---|---|---|
ASTM | UNS | B574 | B575 | B622 | B619/B626 |
ASME | N10276 | SB574 | SB575 | SB622 | SB619/SB626 |
JIS | NW0276 | H4553 | H4551 | H4552 | |
DIN | 2.4819 | 17752 | 17750 | 17751 | 17751 |
Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.