PRODUCTS
Shripal Metal Limited has been providing quality industrial raw material for world class engineering projects, ranging from high-tech nuclear plants to extreme pressure endurable petrochemicals plants, from high speed production food & beverages plants to sterile medical equipment establishments. Over the years, the company has gained vast experience in understanding diversified business needs of the industry and is supplying high-quality products for new projects, expansion, diversification and maintenance of projects. Shripal Metal has played a key role as manufacturer as well as a trader for national and international projects.
-
Pipes
-
Pipe Fittings
-
Flanges
-
Fasteners
-
Plates
-
Rods
-
Structural Steel
-
Hollow Sections
Characteristics
ALLOY601 is a solid solution strengthened Ni-Cr-Fe alloy with additions of Al + Ti
? outstanding resistance to oxidation at high temperatures
? good resistance to carburizing conditions
? good mechanical properties at both room and elevated temperatures
? good resistance to stress-corrosion cracking
Alloy 601 is specifically recommended for service above 550 �C (1022 �F) because of higher creep-rupture properties, resulting from controlled carbon content and coarse grain size.
???1000???2000???3000???3500???4000???2500??3990?
Stock Form and Sizes
Corrosion Resistance
ALLOY 600 is a heat resistant alloy on account of its excellent resistance above 550 �C (1022 �F) against hot gases and combustion products, as well as against molten salt and molten metal corrosion, while at the same time exhibiting good mechanical short-time and long-term properties. Even under severe conditions, such as under cyclic heating and cooling, Alloy 601 retains a tightly adherent oxide layer which is very resistant to spalling.
Resistance to carburization is good. Alloy 601 has also shown good resistance in carbonitriding conditions, if a sufficiently high oxygen partial pressure is present.
Applications
ALLOY601 has found a wide variety of applications in industries as diverse as thermal and chemical processing, pollution control and power generation.
Typical applications are:
? trays, baskets and fixtures for heat treatment plant
? refractory anchors, strand-annealing and radiant heater tubes, high-velocity gas burners, wire mesh belts in industrial furnaces
? insulating cans in ammonia reformers and catalyst support grids in nitric acid production
? components in exhaust gas systems
? combustion chambers in solid waste incinerators
? tube supports and ash-handling components
? components of waste-gas detoxification systems
? oxygen preheaters
Chemical Composition
Limits | C | Mn | Si | Mo | W | Co | V | P | S |
|---|---|---|---|---|---|---|---|---|---|
min | 15 | 3 | |||||||
max | 0.01 | 1 | 0.08 | 17 | 4.5 | 2.5 | 0.35 | 0.025 | 0.01 |
?The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.
Mechanical Properties (Round Bar)
Please contact us with any questions about reference or value of plate and pipe.
?The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.
Value | Condition | Yield Strength(Mpa) | Tensile Strength(Mpa) | Elongation(%) | Hardness(HB) |
|---|---|---|---|---|---|
ASTM Min Value | Solution Annealed | 283 | 690 | 40 | |
Typical Values at RT | Solution Annealed | 402 | 794 | 60 | 195 |
International Standard Comparison Chart
Standards | Material | Round Bars | Plates/Sheets | Seamless Pipe/Tube | Welded Pipe/Tube |
|---|---|---|---|---|---|
ASTM | UNS | B574 | B575 | B622 | B619/B626 |
ASME | N10276 | SB574 | SB575 | SB622 | SB619/SB626 |
JIS | NW0276 | H4553 | H4551 | H4552 | |
DIN | 2.4819 | 17752 | 17750 | 17751 | 17751 |
Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.