PRODUCTS
Shripal Metal Limited has been providing quality industrial raw material for world class engineering projects, ranging from high-tech nuclear plants to extreme pressure endurable petrochemicals plants, from high speed production food & beverages plants to sterile medical equipment establishments. Over the years, the company has gained vast experience in understanding diversified business needs of the industry and is supplying high-quality products for new projects, expansion, diversification and maintenance of projects. Shripal Metal has played a key role as manufacturer as well as a trader for national and international projects.
-
Pipes
-
Pipe Fittings
-
Flanges
-
Fasteners
-
Plates
-
Rods
-
Structural Steel
-
Hollow Sections
Characteristics
AALLOY20 is a low carbon, Nb stabilised austentic Ni-Fe-Cr alloy with alloying additions of Cu & Mo.?
? excellent resistance to sulphuric and phosphoric acids
? good resistance to intergranular corrosion
? very good resistance to chloride-ion induced stress-corrosion cracking
? good resistance to pitting and crevice corrosion
? good mechanical properties at both ambient and elevated temperatures, up to approximately 500 �C (930 �F).
???1000???2000???3000???3500???4000???2500??3990?
Stock Form and Sizes
Corrosion Resistance
ALLOY20has excellent corrosion resistance to sulphuric, phosphoric and organic acids and to aqueous solutions of their salts. Resistance to nitric acid is also good. Due to the controlled chemical composition, the alloy also has excellent resistance to such forms of corrosion as intergranular corrosion and stress corrosion. The molybdenum content ensures good resistance to pitting and crevice corrosion. Optimum corrosion resistance can only be obtained if the material is in the correct metallurgical condition and clean.
Applications
ALLOY20 is used in a wide variety of applications up to temperatures of approximately 500�C (930�F).
Typical applications are:
? equipment for the manufacture of sulphuric acid and for processes based on sulphuric acid
? extraction columns in the production of amines and the processing of pharmaceuticals
? production of plastics and synthetic fibres
? equipment for food processing to protect against contamination
Chemical Composition
Limits | C | Mn | Si | Mo | W | Co | V | P | S |
|---|---|---|---|---|---|---|---|---|---|
min | 15 | 3 | |||||||
max | 0.01 | 1 | 0.08 | 17 | 4.5 | 2.5 | 0.35 | 0.025 | 0.01 |
?The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.
Mechanical Properties (Round Bar)
Above standard values and typical values of Round Bar.
Please contact us with any questions about reference or value of plate and pipe.
?The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.
Value | Condition | Yield Strength(Mpa) | Tensile Strength(Mpa) | Elongation(%) | Hardness(HB) |
|---|---|---|---|---|---|
ASTM Min Value | Solution Annealed | 283 | 690 | 40 | |
Typical Values at RT | Solution Annealed | 402 | 794 | 60 | 195 |
International Standard Comparison Chart
Standards | Material | Round Bars | Plates/Sheets | Seamless Pipe/Tube | Welded Pipe/Tube |
|---|---|---|---|---|---|
ASTM | UNS | B574 | B575 | B622 | B619/B626 |
ASME | N10276 | SB574 | SB575 | SB622 | SB619/SB626 |
JIS | NW0276 | H4553 | H4551 | H4552 | |
DIN | 2.4819 | 17752 | 17750 | 17751 | 17751 |
Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.